本公司為美國PMI公司獨家代理商

本公司提供 客戶完整技術服務與諮詢

如有任何需要我們服務之處

歡迎與我們聯絡!

洽詢電話: (02) 2541-9192

E-mail: info@cyi-pmi.com

Kevin Ku

 -------------------------------------

Fuel Cell Porometer

適用於燃料電池電極, 氣體擴散層等之穿透孔孔徑分佈分析及氣體透過率測試

且可控制測試環境之溫度(0-800℃), 濕度(0-100%rh)及電池樣品加壓(最高可達1000psi)

The PMI Fuel Cell Porometer provides fully automated through-pore analysis including pore-throat diameter, pore size distribution, mean flow pore diameter, and liquid & gas permeability. The porometer’s versatility allows the user to simulate operating conditions. The instrument has special features to measure the effects of compressive stress on a sample, test temperature, sample orientation, layered structure on pore structure characteristics. User-friendly and nondestructive, the Fuel Cell Porometer is an asset in quality control and R&D environments.

Some of the Unique Measurable Characteristics of this machine are:

1. Characteristics measured using gas with 0 to 100 % humidity
2. Test temperatures can be 200°C and in special situations 800°C
3. Pore size measured in samples under compressive stress of up to 1000 psi
4. Pore structure of each layer of a multilayer composite
5. Pore diameters down to about 0.013 µm

Liquid-Liquid Porometer

液體-液體置換法孔隙分析儀

適用於中空纖維(Hollow Fiber), 超過濾材料(Ultra Filtration), 奈米級孔洞( 2nm~500nm ),

等之穿透孔孔徑分佈分析及微量液體透過率測試